Acrylic Polish


NOVUS products present time-proven techniques for cleaning and restoring plastics. Since its introduction in 1973, the number of plastic products has grown tremendously. Yet, as widely used as plastic is, many people are still not sure how to care for it. 


By using a few simple techniques with NOVUS Nos. 1, 2 and 3, you can actually add life to plastic and keep it looking like new. 


Best of all, you don't have to be a pro to get professional results! Just follow the simple instructions and you'll see why plastic products manufacturers use and have recommended NOVUS polish to others for years. 


:: Instructions


Power Buffer 


If the damaged area is fairly large or badly damaged, a power buffer may be used with NOVUS No. 2 and No. 3. Use a clean cotton bonnet and operate the buffer at a low speed to avoid overheating the plastic, approximately 1,000 RPM. Each polish should be applied with a separate, clean bonnet. 


Before Polishing 


Before attempting to clean or remove scratches, always make sure the plastic is cool to the touch. Use a liberal amount of plastic cleaner to safely remove surface dust and dirt. In addition, test scratch removers in a small or inconspicuous area for compatibility. 


Polishing Cloth 


The type of polishing cloth you use will make a difference. The ideal cloth is nonabrasive, absorbent and lint free. To eliminate any chance of scratching, use only disposable cloths. Reusable cloths can retain abrasive particles, but you won't know for sure until the damage is done. Use a soft cotton cloth (such as a diaper), avoid using polyester or rayon wipes which can scratch unprotected plastics. 

Give your acrylics a brand new lease of life
 

I~Tak™     I~Tub™     I~Box™     I~Ref™     I~Cal™     I~Ski™     I~SkiWc™     I~Fil™     I~Zeo™     Novus Polish